SPLIT BEARING MANUFACTURER · SINCE 2008 · 40+ COUNTRIES

Change a Bearing
Without Dismantling
the Shaft

INNOB makes split cylindrical & spherical roller bearings, split plummer block units and custom OEM/ODM. Interchangeable with SKF, Cooper and Timken — same dimensions, shorter lead time, lower cost. Send us your duty and get a quote and a sample to trial.

−70% downtime
1-pc trial order
24h response
Exploded view of a split spherical roller bearing - outer ring halves, brass roller cage and inner ring
THE INNOB WAY

Split it. Drop it in. Restart in hours.

No crane. No shaft teardown. No multi-day shutdown. Our split bearings clamp around the shaft in place — so you cut downtime from weeks to a single shift.

RELIABILITY

Common Failure Modes & How to Avoid Them

Most bearing failures are predictable — and preventable. Know the symptoms, the root cause, and the fix before downtime finds you. We help you avoid them with split design and correct fitting.

Abrasive Wear

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Uniform scoring on raceways & rolling elements; enlarged clearance, reduced size.
CAUSE
Poor lubrication, contaminant ingress (dust, debris), failed seals.
FIX
Improve lubrication, upgrade seals (contact/labyrinth), clean mounting; split design enables online swap.

Spalling / Pitting

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Flaking pits on raceways/rollers, unusual noise & vibration.
CAUSE
Sustained overload, lube-film breakdown, poor fit/alignment.
FIX
Correct sizing & load check, maintain oil film, proper mounting & alignment.

Overheating

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Abnormal heat, darkened grease, discolored rings/cage (blue/brown).
CAUSE
Insufficient/wrong grease, tight fit, overspeed, poor cooling.
FIX
Right grease & fill, check fit/clearance, improve cooling; cooling housings for heavy duty.

Corrosion

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Rust spots, pitting, often off the load zone.
CAUSE
Moisture, failed seals, poor storage protection, aggressive media.
FIX
Better seals, rust-proof coating/SS parts, preservation, special seals in wet duty.

Cage Fracture

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Cage cracked/broken, bearing seized.
CAUSE
Severe vibration, overspeed, cage wear from poor lube, impact.
FIX
Limit speed/vibration, improve lube, reinforced cage.

Split-Face Failure

bearing failure mode
Hover: symptom / cause / fix
SYMPTOM · CAUSE · FIX
SYMPTOM
Oil leakage at the split, halves shift, poor face mating.
CAUSE
Uneven bolt torque, wrong tightening sequence, misaligned faces.
FIX
Cross-tighten to spec torque in steps (8.8-grade, lightly lubed: M10 45–55, M12 80–95, M16 160–200, M20 300–380 N·m); verify face mating & cleanliness before fit.

SOLID vs SPLIT

One Glance: Solid vs Split — and Why Split Wins

A traditional solid bearing is one piece — to change it you must pull the shaft, coupling and gearbox apart. An INNOB split bearing opens along the shaft axis and clamps back around it. No disassembly, no line stop — and the math is simple: the real cost of a bearing isn't the price, it's the hours your line is stopped. One avoided shutdown pays for several sets of bearings. Not sure if your machine suits a split bearing? Ask us — we'll tell you in minutes.

TRADITIONAL

Solid Bearing

Solid bearing on shaft

Must remove the shaft
  • One-piece ring — no split line
  • Slide off only after the shaft is out
  • 8–12 hours downtime per change
  • Crane, crew and high safety risk
  • Production loss billed by the hour

VS

INNOB SPLIT

Split Bearing

Split bearing around shaft

Fits around the shaft
  • Rings split 180° along the axis
  • Clamp around the shaft — no removal
  • Under 1 hour to replace
  • Two fitters, minimal tools, safe
  • Line keeps running — save the hours
Export-ready & qualified:
ISO 9001 quality systemInterchangeable with SKF · Cooper · TimkenExported to 40+ countriesEXW / FOB Qingdao1-pc sample & trial orders
REQUEST A QUOTE

Tell Us Your Duty — Spec & Quote

Send your operating conditions or existing model. Our engineers reply with fitment and quotation within 24 hours. First time working with us? We support 1-piece sample and trial orders — try before you commit.

We respect your data and never share it with third parties.

CASE STUDY

Real Results: How Much They Saved

Split bearings don't just save effort — they save real money on every overhaul.

10h+
Downtime saved per overhaul
≈ $100,000
Avoided loss at $10,000 / downtime hour

Split bearing retrofit on a mining conveyor

The original solid bearing required dismantling the gearbox and couplings — over 12 hours of downtime per change. After switching to INNOB split spherical roller bearing units, the bearing is replaced around the shaft with no disturbance to the drivetrain.

“Same fault used to cost us a whole shift. Now maintenance finishes in under an hour — the line barely notices.”

Get This Solution — Quote Now →

Home / Products

PRODUCTS

Bearings · Housings · Plain Bearings · Accessories

Rolling split bearings, split housings, split plain bearings & shells, plus seals, sleeves, end covers and support blocks — standard items ready to ship, non-standard made to drawing.

PRODUCTS

Full Range, One Factory — Stock or Custom

From standard split bearings to fully custom units — metric (mm) and inch sizes, all produced in-house. What you can buy: in-stock split bearings (ship in ~7 days), made-to-drawing customs, and 1-pc sample trials. Not sure which? Send your duty — we'll pick the model and quote.

Split Cylindrical Roller

Rings split radially, fit around the shaft. EX (loose) & GR (located) designs for high-speed duty.

View models →

Split Spherical Roller

Double-row self-aligning, heavy radial & axial loads. Built for mining, cement and continuous-cast.

View models →

Split Plummer Block Unit

Bearing + housing + pedestal split 180°. Direct fit on SN / SD / SAF standard bases.

View models →

Custom / Non-Standard

Made to drawing or sample. Water-cooled housings, bores up to 1500 mm, special seals. Fast prototyping.

Submit a request →

Split Bearing Housings

2-part cap + base, SN/SD/SAF footprints. Sold with or without bearings.

View models →

Split Plain Bearings & Shells

Babbitt / bronze shells for low-speed, heavy-load, high-misalignment shafts.

View models →

Accessories

Seals, adapter sleeves, end covers and support blocks — all matched to our split range.

View models →

30 Products · Stock Ships Fast

Sort: Recommended · Bore · Load
product
Split Cylindrical Roller

01E Series EX/GR

Mid-load, high-speed. Loose (EX) & located (GR) options. Fits SN/SD housings.

Bore 45–300 mmView & Quote →
product
Split Spherical Roller

SRB 80–450 mm

Double-row heavy duty, ideal for mining, cement, casting. Sealed, maintenance-free.

Bore 80–450 mmView & Quote →
product
Split Plummer Block Unit

SN / SAF Compatible

180° split, drop-in for mainstream pedestal bases.

Pedestal / FlangeView & Quote →
product
Custom / Non-standard

Water-cooled / Large Bore

Made to drawing, bores up to 1500 mm, rapid prototyping.

Quote on requestSubmit needs →
product
Split Tapered Roller

Double-row Located

Carries bi-directional axial load, for located-end duty.

Bore 45–300 mmView & Quote →
product
Technical Resources

Selector · Drawings · 3D

Every model ships with dimension tables, 2D drawings & 3D models.

DownloadGo →
product
Split Bearing Housing

Split Bearing Housing (SD/SAF)

2-part cap + base in grey/ductile iron. Same footprint as SN/SD/SAF — fit our split bearings or your own.

Shaft 40–1500 mmView & Quote →
product
Split Plain Bearing

Split Plain Bearing & Shell

Babbitt or bronze shells in a 2-part housing. For low-speed, heavy-load, high-misalignment shafts.

Shell: Babbitt / BronzeView & Quote →
product
Accessory · Seals

Labyrinth / Contact Seals

Triple-labyrinth, felt and contact styles. IP-rated against dust, water and slurry.

Dust / Wet / SlurryQuote Now →
product
Accessory · Sleeve

Adapter / Withdrawal Sleeve

Tapered sleeves with lock nut & washer for shaft mounting. Metric and inch sizes, matched to our bearings.

Taper 1:12Quote Now →
product
Accessory · End Cover

End Cover / Cap

Seals the housing bore end — keeps grease in, contaminants out. Split and solid styles for SN/SD/SAF.

For SN/SD/SAFQuote Now →
product
Accessory · Support

Support Block / Pedestal

Reinforced pedestal bases and flange blocks. Simplifies anchoring and shaft alignment on site.

Pedestal / FlangeQuote Now →

Split Spherical Roller Bearing SRB · 240–450 mm

Quote / Catalog

Type Split spherical roller (double-row)
Bore range 240 – 450 mm (9.45 – 17.72 in)
Load Heavy radial + bi-axial
Sealing Triple labyrinth + optional waterproof
Applications Mining / Cement / Casting / Power
Interchange Same dims as major brands

Download engineering files for drop-in replacement validation:

Stock available for standard bores; custom sizes welcome — flexible lead time.

Housings · Plain Bearings · Accessories

Quote / Catalog

Housing

application scene
Series SN (small) · SD (mid/large) · SAF (large) · S3000
Material Grey cast iron GG25 / Ductile iron GGG40–50
Shaft dia. 40 – 1500 mm (SN 20–140 / SD 115–900 / SAF 115–1000)
Base 2-bolt / 4-bolt pedestal
Sealing Labyrinth / felt / contact / V-ring
Lubrication Grease nipple / oil bath
Interchange Same bolt pitch & base as SN/SD/SAF
Temp. range −30 ~ +200 ℃
Standard ISO 113 · DIN 504
Mining · conveyor & crusherCement · mill & kilnPower · fan & pumpPaper · dryer

Plain

application scene
Type Split journal bearing (split shell)
Shell material Babbitt SnSb11Cu6 / Bronze CuSn8 · CuPb10Sn10 / bi-metal
Shaft dia. 50 – 1500 mm
L/D ratio 0.5 – 2.0
Specific load Babbitt ≤ 15 MPa · Bronze ≤ 25 MPa
Speed Low speed, sliding < 2 m/s
Misalignment Tolerates up to 1°+
Lubrication Oil bath / grease / graphite (dry)
Hydro · turbine generatorSteel · rolling millMarine · tail shaftMining · ball mill

Parts

application scene
Seals Labyrinth / felt / contact (TC) / V-ring; NBR·FKM·PTFE·steel; IP65/IP66 equiv; −40~+200℃
Adapter sleeve Series H2xxx / withdrawal AH2xxx; taper 1:12; shaft 17–400 mm (AH to 1000); KM nut + MB washer; ISO 2982 / DIN 5415
End cover Split & solid; grey iron / steel / PA; for SN/SD/SAF bore; seals bore end
Support block Pedestal / flange / take-up; cast iron or fabricated steel; 2/4-bolt base, drilled to drawing
Sealing · dust / wet / slurryMounting · pulley / gear on shaftAlignment · site anchoring

Supplied as a complete split system or as individual spares — same dimensions as mainstream brands, freely combined with our split bearings.

Standard sizes in stock; custom drawings welcome — flexible lead time.

Can't find the exact model?

Send us your duty parameters or the old part number — we'll engineer a drop-in alternative.

Submit a Custom Request →

How to Read INNO Designations

Every INNO split bearing, cartridge and housing follows a logical coding system.

1 · Bearing designation

Series 100 / 01 / 01E / 02 / 02E / 03 / 03E / 04 — split cylindrical roller; 1DT — split tapered roller
Size Metric: bore + “M” (35M–600M). Inch: whole inches + 2 digits of sixteenths (103 = 1 3/16 in).
Locating EX — non-locating (axially free / float); GR — locating bearing.
Suffixes C2 / C3 / C5 — radial clearance; ALF — locating outer ring & non-locating inner ring; FR — high-temp stabilised; CHAM — special bore chamfer.

2 · Cartridge designation

Structure Bearing series + “C” (cartridge) + material + size + EX/GR + suffixes.
Material – grey cast iron · A aluminium · N ductile iron · S steel · SS stainless steel.
Size Bore + “M” for standard seals; housing reference number for labyrinth seals.

3 · Housing designation

Type P — plummer (pillow) block · F — flanged (round) · DF — flanged (square) · H — hanger · TP — push take-up · TT — tension take-up
Interchange SNC — SN interchangeable · SDC — SD interchangeable · SAFC / SAFQ — SAF interchangeable.
Material – grey iron · A aluminium · N ductile iron · S cast steel · SS stainless steel.
Decoding example: 01EB130M = 01-series split cylindrical roller bearing, non-locating (EX), 130 mm bore.

Engineering notes

Materials Rings & rollers: high-carbon chromium bearing steel. Cages: brass (tapered) / per series table (cylindrical).
Sealing Felt seals or labyrinth seals as standard; optional end covers BP / BT with/without thrust bearing.
Lubrication Grease selected per INNO recommendation table by speed; relubrication interval set from speed & sealing.

Home / Industries

INDUSTRIES

Built for Hard-to-Stop Equipment

Every industry below runs machines that are expensive to stop. We match the split bearing, housing and seal to the duty — so maintenance fits the machine, not the other way around.

INDUSTRY 01

Mining & Cement

Dust, shock loads, non-stop conveyors

The Challenge

Conveyors, stacker-reclaimers and kilns run 24/7 in abrasive dust. A solid bearing change means dismantling the gearbox — days of lost production.

Our Solution

  • Split spherical roller — heavy shock loads
  • Triple labyrinth seals against dust
  • Replace around the shaft in hours

The Payoff

  • −70% planned downtime
  • No crane, no drivetrain strip
  • Bores 80–450 mm stocked
INDUSTRY 02

Steel & Metals

Heat, cooling beds, continuous casting

The Challenge

Casters and rolling mills run hot and never stop. Standard bearings fail early under heat and misalignment; a stoppage halts a whole line.

Our Solution

  • Water-cooled plummer block housings
  • Self-aligning split spherical roller
  • Fast custom for non-standard shafts

The Payoff

  • Survives high-heat duty
  • Replace without line stop
  • Bores to 1500 mm
INDUSTRY 03

Power & Wind

Generators, fan & turbine shafts

The Challenge

Generator and fan shafts are long and hard to access. A solid bearing change means a full outage; every hour offline costs the utility heavily.

Our Solution

  • Split cylindrical roller, high-speed EX/GR
  • Fit around the shaft, no outage
  • Full dimension & 3D files for approval

The Payoff

  • Maintenance during operation
  • High-speed, low-vibration
  • Direct fit on SN/SD bases
INDUSTRY 04

Marine & Port

Salt spray, quay cranes, propulsion

The Challenge

Propulsion shafts and quay cranes face salt spray and vibration. Corrosion and a seized bearing can ground a vessel or stop a terminal.

Our Solution

  • Stainless & coated options
  • Waterproof sealed plummer blocks
  • Rapid repair, minimal downtime

The Payoff

  • Corrosion-resistant builds
  • Replace in dry-dock windows
  • Global express shipping
INDUSTRY 05

Pulp & Paper

Long dryers, press rolls, moisture

The Challenge

Dryers and press rolls have very long shafts. Removing a solid bearing means stripping the entire roll line — a multi-day job.

Our Solution

  • Split design for long shafts
  • Moisture-resistant seals
  • Keep the roll in place

The Payoff

  • Hours, not days, per change
  • Less rolls removed
  • Stable, repeatable fit
INDUSTRY 06

Rail & Transit

Traction & auxiliary drives

The Challenge

Traction and auxiliary drives demand high reliability and long service life; failures cause delays and safety risks.

Our Solution

  • Split tapered roller, located-end
  • Bi-directional axial control
  • 100% inspected, traceable

The Payoff

  • Long, predictable life
  • Faster track-side service
  • Full quality docs

Don't See Your Exact Machine?

Tell us the duty — shaft, load, speed, temperature, space — and we'll specify a drop-in split solution, often with a shorter lead time than the original.

Send Duty · Get Quote

Home / Bearing Selector

ONLINE SELECTOR

Find Your Split Bearing
in 30 Seconds

Answer a few duty questions and we'll recommend the right split bearing or unit — with the reason behind each match. For a formal quotation, send the result to our engineers.

Your Duty

Pick the closest option for each. The more you tell us, the sharper the match.

Not sureLet us decide
CylindricalHigh speed
SphericalHeavy / misalign
Plummer blockWith housing
TaperedAxial load
Custom / large>300 mm

Radial
Radial + axial
Heavy shock

Low <300 rpm
Medium
High >1500

Normal
Dusty
High temp
Wet / salt

Any / other
Mining / Cement
Steel / Metals
Power / Wind
Marine / Port
Paper / Light
Rail / Transit
⇄

Replace a branded bearing
Enter the brand model on your equipment — we show the matching INNOB split bearing.

Recommended

Preliminary

Fill in your duty on the left and hit “Recommend My Bearing”.
ENGINEERING

Engineer It Yourself, 24/7

Everything your engineer needs to verify the fit before talking to sales — selector, drawings, 3D and catalogs.

Online Selector

Enter duty parameters, get the matched bearing & housing.

3D CAD Models

STEP / IGES for direct assembly validation.

2D Drawings & Tables

Dimension tables & drawings for drop-in replacement.

Catalogs & Guides

Product catalog & mounting guides, download anytime.

Need a Formal Quotation?

The selector is a starting point. Send us your duty and the recommended model — our engineers confirm dimensions, ratings and lead time within 24 hours.

Send Duty · Get Formal Quote

Home / News

NEWS & INSIGHTS

What We're Shipping,
Learning & Solving

Case studies, technical guides and company updates — practical reading for maintenance engineers and procurement.

All
Case Study
Technical Guide
Company News
Industry Trend
news
TECHNICAL GUIDE

Split vs solid: when to switch

A practical checklist for maintenance managers — five signs a split bearing will save more than it costs on your machine.

Read →

Sep 2026
news
COMPANY NEWS

INNOB adds 1500 mm water-cooled line

Our new large-bore, water-cooled plummer block line serves steel and continuous-casting customers with faster custom lead times.

Read →

Aug 2026
news
INDUSTRY TREND

Why distributors stock split bearings

Aftermarket demand for split units is rising as plants chase uptime. We explain the margin and service opportunity for bearing distributors.

Read →

Jul 2026
news
TECHNICAL GUIDE

Interchangeable with SKF/Cooper

How we confirm interchange dimensions and ratings, and what to send us so your cross-reference quote comes back fast.

Read →

Jul 2026
news
CASE STUDY

Paper mill dryer: days to hours

A European paper mill kept its dryer roll in place and replaced split cylindrical bearings in a planned stop — no roll strip, no rebuild.

Read →

Jun 2026
news
COMPANY NEWS

INNOB passes ISO 9001:2015 recert

Our quality system was recertified with zero major findings — documentation and traceability buyers can audit with confidence.

Read →

Jun 2026

Want These Insights — or a Consult?

We publish practical split-bearing guides and case studies for maintenance and procurement teams. Tell us your application and we'll send relevant updates — or answer your bearing question.

Subscribe or Ask →

Tip: press / to search anytime · click a result to jump